Hi,

yes, this was my firs upload and I did not know what would be necessary to tell people.

1. wherever you  find Leave blocks - waterlog them.
2. at the upmost level - fill in Lava between the Trapdoors. This is your main collumn.
3. set the rotation so that everything that is needed is taken out of the Vaults in the main collumn
4. Everything should get around on the conveyor belts.

It should be a easy fix by playing around with the direction speed as everything is controlled by Filters and Threshold Switches. 

It usually takes a little while to start up as the first Vaults in the Main Collumn have to fill up.

Hope it helps!

First of all, thanks for your Quick answer!

Ich have already figured out, that i have to waterlog and fill in the cobblestone generator myself. Next up, there is this ordering station...so if I want to get any outputs, I have to order them, right?

Because if so, I need to setup a host for the links to access the system.

My second problem ist still the rotation, because no matter what I set the direction, there are always belts running the wrong direction and if they don't the crushing wheels are spinning in the wrong direction. How does this happen? 

Thanks for your patience in advance!

Hi,

Yes you need to link the outputs to your pre-existing system or just automate the outputs - whatever you prefer.

After some testing I found out the grinding wheels sometimes spin a different direction depending on wich direction you load in the schematic. Easiest quick fix is to put in a few vertical connectors to revert the direction.

but don't worry I'm currently working on a fully automated plug and play Andesite casing System, which also puts out andesite and wood. And I try to fix those issues with that.

good luck^^